Industrial & Hazardous Area Lighting
Light every part of the site people have to walk into at night
Poor lighting is where slips, misreads and near-misses come from, and the worst-lit areas are usually the ones standard fittings cannot legally go. Raytec LED lighting covers both: workshop, walkway and yard lighting on one hand, IECEx-certified fittings for declared zones on the other.
How Site Lighting Gets Specified
Classify the area, match the fitting, verify the levels.
Classify the Area First
Ordinary, or a certified gas or dust zone. The classification decides the certification, and the certification decides which fittings are even eligible.
Match the Fitting to the Job
Linear battens for walkways and plant rooms, floods for yards and stockpiles, bulkheads and exit lighting for buildings, IECEx-certified where the zone requires it.
Verify Levels and Conditions
Lux levels checked against the task, plus environmental conditions such as amber turtle-friendly output on sensitive coastal sites.
What Sites Get Out of It
The outcomes that matter on site.
Night Work Carries Less Risk
Walkways, transfer points and plant rooms lit to the task, so night shift can see the hazards it is working around.
Certification Evidence Ready at Audit
Every fitting in a classified area carries its IECEx documentation, no scrambling when the auditor asks.
Lower Energy and Maintenance Cost
LED replacement cuts consumption and takes the recurring lamp-change task off the maintenance schedule.
Coastal Environmental Conditions Met
Turtle-friendly amber lighting satisfies environmental approval conditions on sensitive coastal sites.
We supply and support the product. The customer's team or their integrator installs and commissions it. We make sure it is the right one.
Which Zone Is the Fitting Going Into
Certification is specified per fitting, not per site. Find the zone the light has to live in, and the protection method that goes with it.
Ex Protection Methods We Supply
Zone, gas group and temperature class are confirmed per project before equipment is specified. Send us the hazardous area classification drawing and we will match certification to it.
Where This Application Matters Most
Every sector we supply has areas that are dark, classified, or both.
Products and Brands Behind This Application
Raytec anchors the range, certified or standard, indoors or across the yard.
Control stations, certified panels, purge systems and portable equipment now live on Hazardous Area Equipment Protection.
Hazardous LED Lighting for the Port Moresby Power Station
How Pacific Automation delivered a Raytec SPARTAN LED solution for a 58MW power plant in PNG, reducing cost, carbon footprint and maintenance downtime.
Read the Case StudyWhere does it run?
Indoor or outdoor, mounting height, and whether it is a hazardous area. Zone, gas group and temperature class are confirmed per project before equipment is specified.
What is it doing?
General, task, flood or emergency lighting, and how it is switched.
What if it is wrong?
Night work in poor light, or uncertified fittings in a zone. So we check lux and certification first.
Send Us the Area You Need Lit
Dimensions, mounting heights, target lux and the zone classification if the area is declared. We will come back with a fitting schedule and the certification documentation that goes with it.