Bernstein F2-ZSP3D/ZSP3D UN Foot Switch

F2-ZSP3D/ZSP3D UN
Foot switch metal; 2-pedal; with protection shroud; per pedal: 1 NC/2 NO; both pedals with enabling function and PNP additional board

Suitable for high requirements in industrial applications. Existing mounting holes offer the possibility of screwing the foot switches to the base. Each foot switch is equipped with four rubber feet to prevent slipping. In the case of multi-pedal foot switches, crossbars prevent the unintentional simultaneous actuation of several pedals (versions without crossbars available on request) The foot levers are made of thermoPlastic. A protection shroud made of die-cast aluminium completely shields the pedal from the top and sides and, with its wide projection, ensures a high degree of stability. Accidental actuation by falling objects from above or carelessness from the side is thus prevented. Due to its stability, the bonnet can withstand a drop weight of 20kg from a height of 1m. Foot switches are often used as so-called 'command devices with automatic reset' or 'jog switches' for short, to set a machine to the operating state. Foot switches with enabling function are ideally suited for this purpose, as they meet very high safety requirements with the integrated approved enabling switch insert. The contact design and switching function of these switches are identical to those of the enabling foot switches. The pedal position can be detected dynamically with the signal contact or statically with the additional printed circuit board. The foot switch with enabling function is available with and without detent as well as with accident protection cover.