Bernstein F1-ZSDR UN Foot Switch

F1-ZSDR UN
Foot switch metal; 1-pedal; with protection shroud; pedal: 1 NC/2 NO; with enabling function, safety latch and manual release

Suitable for high requirements in industrial applications. Existing mounting holes offer the possibility of screwing the foot switches to the base. Each foot switch is equipped with four rubber feet to prevent slipping. The foot lever is made of thermoPlastic. A protection shroud made of die-cast aluminium completely shields the pedal from the top and sides and, with its wide projection, ensures a high degree of stability. Accidental actuation by falling objects from above or carelessness from the side is thus prevented. Due to its stability, the bonnet can withstand a drop weight of 20kg from a height of 1m. Foot switches are often used as so-called 'command devices with automatic reset' or 'jog switches' for short, to set a machine to the operating state. Foot switches with enabling function are ideally suited for this purpose, as they meet very high safety requirements with the integrated approved enabling switch insert. The contact design and switching function of these switches are identical to those of the enabling foot switches. The pedal position can be detected dynamically with the signal contact or statically with the additional circuit board. The foot switch with enabling function is available with and without detent as well as with accident protection cover.